30.04.2012, 14:25
Dmitry75 Wrote:Подскажите кто знает, как переделать "физику" автомобилей?
Взял мод с физикой GNS, эту утилиту: ftp://81.19.152.171/NR2003/utils/ModifyCarFiles/ положил в папку cars и модифицировал все машинки в CTS. Далее в текстовом файле LST (находится в той же папке), тоже переименовал все в CTS, а в файле series прописал:
[Series]
car_classes=9 ; Bitwise-or of allowed classes.
type=2 ; (0=cup, 1=gns, 2=truck)
Захожу в игру, но в меню PLayer Info - пусто!
Мне сейчас немного некогда вспоминать, ухожу, вот моя переписка с Яном из v8, в которой он меня учил переделывать физику в моде + там видимо был нужен какой то файл, прилагаю, с помощью него надо что то модифицировать...
ЗЫ. Читать надо снизу вверх.
Quote:Message subject: Re: Hi
Folder: Inbox
ah so you were trying to pack the dat file with winmip? yes that facility is broken, you need to use makedat
Sent at: 23 May 2011 21:24
View message
Alex Pab
Message subject: Re: Hi
Folder: Sent messages
Ian-S wrote:
ok give me an hour or two to work on it
Ian, I did it!! I did! winmip not approached, but I was helped by utilities DatX and MakeDat. Thank you very much for the instruction and support.
Sent at: 23 May 2011 21:21
View message
Ian-S
Message subject: Re: Hi
Folder: Inbox
ok give me an hour or two to work on it
Sent at: 23 May 2011 21:03
View message
Alex Pab
Message subject: Re: Hi
Folder: Sent messages
Ian-S wrote:
it compresses some files.
nothing comes out, if not corrected sts, decompresses and converts the packs, cost to fix 6 files on gns - error.
Sent at: 23 May 2011 20:40
View message
Ian-S
Message subject: Re: Hi
Folder: Inbox
it compresses some files.
Sent at: 23 May 2011 20:01
View message
Alex Pab
Message subject: Re: Hi
Folder: Sent messages
Ian-S wrote:
here you go...
put in directory & run, you may need to rename the dat file that it makes (and possibly run with admin privilages if in W7)
I unpack, I can not pack back, I get a file GN69ST.dat smaller ...
Here's a program - ftp://81.19.152.171/NR2003/utils/graphics_tools/
Sent at: 23 May 2011 19:57
View message
Ian-S
Message subject: Re: Hi
Folder: Inbox
here you go...
put in directory & run, you may need to rename the dat file that it makes (and possibly run with admin privilages if in W7)
Sent at: 23 May 2011 18:08
View message
Alex Pab
Message subject: Re: Hi
Folder: Sent messages
Ian-S wrote:
unpack the GN69ST.dat file, rename these files as:
make_a_cts.3do to make_a_gns.3do
make_a_cts_light_cockpit.3do to make_a_gns_light_cockpit.3do
make_a_cts_pieces.3do to make_a_gns_pieces.3do
make_a_cts_shadow.3do to make_a_gns_shadow.3do
make_a_cts_ui.3do to make_a_gns_ui.3do
make_a_cts.cam to make_a_gns.cam
repack the dat file, perhaps rename it slightly (and the folder name), then change the series.def file as follows:
[Series]
car_classes=9 ; Bitwise-or of allowed classes.
given_name=GN69ST v1.0 ; Unlocalized series name
type=2 ; (0=cup, 1=gns, 2=truck)
to
[Series]
car_classes=5 ; Bitwise-or of allowed classes.
given_name=GN69ST v1.0 (GNS) ; Unlocalized series name
type=1 ; (0=cup, 1=gns, 2=truck)
change the carfile physics and that's it.
Let me know if you need anything doing.
Program found, now I can not make a repack ....
Sent at: 23 May 2011 15:07
View message
Alex Pab
Message subject: Re: Hi
Folder: Sent messages
Ian-S wrote:
unpack the GN69ST.dat file, rename these files as:
make_a_cts.3do to make_a_gns.3do
make_a_cts_light_cockpit.3do to make_a_gns_light_cockpit.3do
make_a_cts_pieces.3do to make_a_gns_pieces.3do
make_a_cts_shadow.3do to make_a_gns_shadow.3do
make_a_cts_ui.3do to make_a_gns_ui.3do
make_a_cts.cam to make_a_gns.cam
repack the dat file, perhaps rename it slightly (and the folder name), then change the series.def file as follows:
[Series]
car_classes=9 ; Bitwise-or of allowed classes.
given_name=GN69ST v1.0 ; Unlocalized series name
type=2 ; (0=cup, 1=gns, 2=truck)
to
[Series]
car_classes=5 ; Bitwise-or of allowed classes.
given_name=GN69ST v1.0 (GNS) ; Unlocalized series name
type=1 ; (0=cup, 1=gns, 2=truck)
change the carfile physics and that's it.
Let me know if you need anything doing.
Hi no where I can not find a program Winmip2, to open GN69ST.dat
Sent at: 23 May 2011 14:25
View message
Ian-S
Message subject: Re: Hi
Folder: Inbox
unpack the GN69ST.dat file, rename these files as:
make_a_cts.3do to make_a_gns.3do
make_a_cts_light_cockpit.3do to make_a_gns_light_cockpit.3do
make_a_cts_pieces.3do to make_a_gns_pieces.3do
make_a_cts_shadow.3do to make_a_gns_shadow.3do
make_a_cts_ui.3do to make_a_gns_ui.3do
make_a_cts.cam to make_a_gns.cam
repack the dat file, perhaps rename it slightly (and the folder name), then change the series.def file as follows:
[Series]
car_classes=9 ; Bitwise-or of allowed classes.
given_name=GN69ST v1.0 ; Unlocalized series name
type=2 ; (0=cup, 1=gns, 2=truck)
to
[Series]
car_classes=5 ; Bitwise-or of allowed classes.
given_name=GN69ST v1.0 (GNS) ; Unlocalized series name
type=1 ; (0=cup, 1=gns, 2=truck)
change the carfile physics and that's it.
Let me know if you need anything doing.
Sent at: 23 May 2011 07:20
View message
Alex Pab
Message subject: Hi
Folder: Sent messages
Hi Ian. I have to ask of you. If you have any free time you can help me, please. Me for the Russian league to alter GN69ST Mod - http://www.racingrafix.com/download2/gn69st-mod.html under physics GNS, I have a manual - http://www.thepits.us/files/tutorials/t ... ewmod1.pdf , but I do not know very well English.
Thank you.
Alex
P.S. How to alter the physics carfile I know.